QualiMed Zeus Series I

QualiMed Zeus Series I of Medical Defibrillator Machine QMCDFZU1 is a Biphasic AED Defibrillator with Monitor. Its medical uses are:

• QualiMed Zeus Series I of Medical Defibrillator Machine QMCDFZU1 can meet the clinical needs from Basic Life Support (BLS) to Advanced Cardiac Life Support (ACLS).
• It is useful devices that can restore a normal heartbeat by sending an electric pulse or shock to the heart.
• It can be used to prevent or cure an arrhythmia, a heartbeat that is uneven, slow or too fast.
• Defibrillators can also restore the heart’s beating can be restored during the sudden heart stops by Defibrillators.
• Patient like children, teens, and adults particularly in all ages of patient can use QualiMed Zeus Series I of Medical Defibrillator  Machine QMCDFZU1

• QualiMed Zeus Series I of Medical Defibrillator  Machine QMCDFZU1 is Fully portable, lightweight and easy to carry
• Work function period type fastest ‘ready to shock’ time of any product on the market
• The machine guide the user by automatic voice prompts through the rescue procedure, enabling efficient CPR to be administered in conjunction with AED use.
• Non-automated shock button minimizes the risk of accidental shock, to ensure the safety of users and bystanders
• It has four-year standby shelf life guarantee, which means the defibrillator will be ready to work without maintenance for four years
• The inclusion of  implantable cardioverter defibrillators (ICDs), which are surgically placed inside the body of a patient, and wearable cardioverter defibrillators (WCDs), which will rest on the body.

Display:

• Screen Type: High-resolution display
• Screen Size: 7 inch (17.7cm) diagonally
• Sweep Speed: 25mm/sec

Information: Heart Rate, Lead/Pads, Alarm on/off, Sop2, AED Functions and Prompts, Alarm Selection and Limits, Delivered Energy.

• Defibrillator Waveform: Biphasic
• Charge Prompt Type: Voice and visual prompts.
• Electrode Impedance Measurement Range: 0-250 ohms.

ECG Monitoring

• Patient Connection: 3-lead ECG cable, or 5-lead cable, paddles.
• Lead Selection: Display on monitor, paddles, I, II, III, AVR, AVL, AVF, V,
• ECG Size: 0.25, 0.5, 1, 1.5, 2, 4cm/mV display on monitor
• Heart Rate: 20-300 BPM
• Heart Rate Alarm, On/Off displayed on monitor, user-selectable.
• Smart Alarms: Beeper/Voice prompts indicate shock able rhythm.
• Battery Type: Rechargeable, Ni-MH Battery, 12V.

Operating Time:

For a new, fully charged battery, 60 defibrillator discharges at maximum energy, or 3 hours minimum of continuous ECG monitoring, Additional parameters will effect operating time with different functions.

Spo2 Module

• Measurement Range: 30~100%, ±2% between 80%~90%, others ±5%
• Alarm Range: User set high limit and low limit.
• Alarm Accuracy: ±10% within setting values.
• Alarm time Accuracy: less than 12 sec.
• Recorder Paper: 50mm thermal.
• Speed: 12.5mm/sec, 25mm/sec, 50mm/sec, User-selectable 6-second delay.
• Printing Method, High-resolution, thermal print head
• On/Off Control: Front Panel and paddle.
• Automatic Function: 9-seconds recording initiated by alarm activation or defibrillator charge or defibrillation discharge.

AED Mode

AED Function: Auto analyzer and charge x3 with programmable auto energy level selection, screen prompts, and voice prompts.

Shockable Rhythms: Ventricular fibrillation with amplitude≥200mV, ventricular tachycardia with rates ≥140bpm, and QRS complex wave duration≥140ms.

Charge Control: Control on device front panel, press key on paddle. Prompts, Voice and visual prompts

Manual Mode

Energy Selection: Selectable at 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules.

Synchronized Mode: Synchronizes defibrillator pulse to patient’s R-wave, “SYNC” message displayed on monitor.